FilterStream V2210 User Manual download pdf (Page 8)

WALL MOUNTABLE CHARGING BASE

The Charging Base recharges your DirtTamer

Deluxe

™

V2210 vacuum and stores the vacuum with

its cleaning tools for convenient access.

The Charging Base can be mounted vertically

(see Figure A) or placed on a horizontal surface

such as a counter, shelf, etc.

If you choose to wall mount the Charging Base,

please follow these steps:

1.Pick a convenient position within 6 feet of an

electrical outlet. If the Charging Base will be

mounted closer to an outlet, wrap any excess

cord in the storage area on the back of the

Charging Base.

(Note: Do not use an outlet which is controlled

with a wall switch).

2. Place the Charging Base against the wall in the

desired location and mark the center of each hole.

3.Drill a

⁄16” diameter hole

through the center of the

top mark. Push a Plastic

Wall Anchor into the

drilled hole.

4.Insert one of the included

screws and turn it until

the screw head is

⁄4”

above the wall surface.

5.Recheck that the hole

alignment is straight, then

drill the second hole and

install the other Plastic

Wall Anchor and Screw.

6.Slide the Charging Base into place making sure

the cord exits through one of the slots.

Wall

Mounting

Base

Charging

Plug

Figure A

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments

FilterStream V2210 User Manual Page 8

Comments to this Manuals